Home |  Products |  Download |  Contact |  Support |  Orders |  Partners |  Links |   
www.ea4tx.com
 
 
In This Section

Products Home
Antenna Rotator System
Introduction
ARS for DOS
ARSWIN
Compatible Rotors      
RCI Boards
Setup
FAQ's
Developers Area

 

Download Area

 

Programs Supported


Antenna Rotator System - RCI Boards

The RCI Board, is a small PCB (12,5cm x 8cm) that will be conected between the Control Unit, the Rotor Unit, and a LPT port on the computer
Two boards are availables:

Main board or RCI:

  • This board is the basic option that let handle the Azimuth rotator. There are several relays available
    • Left turn
    • Right turn
    • AUX, usefull for those rotors that include  a Brake or Speed control.
  • 2 * 8 bits ADC. (10 & 12 bits ADC resolution optionally)
  • 1 interface with the LPT Port.

Daughter Board or RCI-EL:

  • This second board it's necesary for those who want to use an elevation rotator too. It's conected to the main board, and it has 2 optional relays. In this way, the combination of RCI+RCI-EL, will let you control 2 rotators: Azimuth and Elevation.

Specifications:

  • Each relay has 2 circuits (5A/220V).
  • Input voltage: between 12-14V
  • Current: stand-by mode less than 60mA and when relays energized less than 200mA
  • 2 A/D conversors (8, 10 or 12 bits )
  • DB-25F conector for attaching to the parallel port on the PC.